1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade

(No reviews yet) Write a Review
SKU:
WF-SW1500-304G
Shipping:
Free Shipping
  • 1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade
  • 1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade
  • 1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade
  • 1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade
  • 1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade
  • 1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade
  • 1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade
  • 1500mm Stainless Water Wall Blade - 35mm Lip x 304 Grade
$249.00
Frequently bought together:

Description

Luponds 1500mm Wide 304G Stainless Steel Water Blade for Water Wall Effect.

Entertaining outdoors used to mean just a gathering around your barbeque. With our range of premium wall mounted spillways, made from 304 Grade stainless steel allows you to completely rethink how you can create your new focal point by designing your new water fall features.

With its' open lip design, these range of commercial quality stainless steel waterwall spillways can be used to create cascading (wall washing) and projecting sheet water feature effects.

Kit Includes:

  • Size: 1500mm Long x 80mm Wide x 80mm High
  • Lip: 35mm 
  • Material: 304 Grade stainless steel, brushed finish
  • Inlet Size: 2 x 25mm Female Threaded
  • Inlet Entry: Bottom
  • Warranty: 1 year on unit only
  • Water Type - For fresh water use only, not chlorinated or salted. Order our 316 grade stainless spillways for chlorinated and marine water set ups.

 

Types of Effects :

1. Wall Descent - This is achieved where water flows softly from the spillway and cascades down the wall face into a pond or pool. Recommended to install a pump with a minimum flow rate of 50-60 litres per minute (l/m) per metre spillway width. 
    
2. Falling Sheet - This is achieved where water flow is allowed to run away from the wall, so that a sheet of water "free falls" vertically downwards. Recommended to install a pump with a minimum flow rate of 120 litres per minute (l/m) per metre spillway width.
    
3. Projecting Sheet - This is achieved where a large volume of water passes through the spilllway, producing a solid sheet of water that projects away from the wall. Recommended to install a pump with a minimum flow rate of 150 litres per minute (lpm) per metre spillway width, and the spillway installed no higher than 900mm from water level. Note - The further the water drops, the narrower the water sheet widths become due to surface tension. The projection from the wall is approximately 100-200mm dependent on pump size.

 

Package Content

  • 1 x 1500mm Wide 304G Stainless Steel Water Blade
Note - Always read Instruction Manual thoroughly before installation.
View AllClose