PondMAX - CleanMAX+ Algaecide Pond Cleaner 940ml

CleanMAX+ starts to clean in seconds of application to remove debris, add oxygen and clean the pond from top to bottom. Use CleanMAX+ on waterfalls, plant pots & streams.
When using CleanMAX+ always make sure there is vigorous aeration using a waterfall, bubbler, fountain, air stone or spitter.

CleanMAX+ requires heavy aeration especially in hot weather to get the best results.

The CleanMAX+ is a specifically designed formula to clear pond water quickly and efficiently, regardless of the water volume.

Features

• CREATES A HEALTHY AND CLEAR AQUATIC ENVIRONMENT
• REDUCES OVERALL POND MAINTENANCE
• WORKS TO ELIMINATE UNWWANTED AQUATIC DEBRIS
• (Previously D-Solv9 Complete Pond Cleaner)
• This 940mL bottle treats up to 36,340L

 FOR BEST RESULTS:

• After initial dose, use once a week at the prescribed rate below;Prescribed rate : 5ml CleanMax+, every 380L of Pond water.
• Use CleanMAX+ first before using any other treatments
• Apply in the morning under sunny, calm conditions. Debris can be removed from pond by skimmer or net. Use when pH is between 7.0 to 8.0
• Shake well before use

 Application Rates 

30ml – Treats up to 2,720 Litres
60ml – Treats up to 4,540 Litres
120ml – Treats up to 9,080 Litres
240ml – Treats up to 18,170 Litres

Apply directly to the affected area once per week at the prescribed rate. Use the maintenance dosage of CleanMAX+ once a week to keep your waterfalls and streams looking pristine. 

Note: Please read and adhere to instructions on pack to ensure best results.

TO CALCULATE APPROXIMATE POND CAPACITY: 

Length (m) x Width (m) x Average Depth.  (measurements in metres x 1000 for litres)